Model AK compressors are rated in Btu per hour. They have a 7000 to 12,000 Btu rating range. All model AK compressors are used for…
Author: admin
The AE compressors are used for household refrigerators, freezers, dehumidifiers, vending machines, and water coolers (see Fig. 9-12). They are made in 1/20, 1/12, 1/8,…
The T and AT compressor models have 1/6-, 1/5-, 1/4-, and 1/3-hp motors. All of these models use R-134a refrigerant or its equivalent replacement. The…
Pancake models are designated with a “P” as the first letter of serial number. They are made with 1/20- to 1/3-hp motors. All of them…
Ahermetic compressor is a direct compressor—a direct-connected motor compressor assembly enclosed within a steel housing. It is designed to pump low-pressure refrigerant gas to a…
The fluid cooler uses a mechanically induced draft, crossflow technology. And, the fill media is located above the coil. The process fluid is pumped internally…
The fluid cooler is one of the most efficient systems for industrial and HVAC applications (see Fig. 8-26). By keeping the cooling process fluid and…
Crossflow towers, as shown in Fig. 8-24, have a fill configuration through which the air flows horizontally. That means it is across the downward fall…
The atmospheric type of tower does not use a mechalnical device, such as a fan, to create air flow through the tower. There are two…
Acooling tower is a device for cooling a stream of water. Evaporating a portion of the circulating stream does this. Such cooled water may be…