The flame rectification sensor is commonly used in high efficiency furnaces that use direct burner ignition. Direct Burner Ignition System Flame Rectification Circuit — Direct…
Category: Instruments & Devices
Thermocouples are used on residential gas furnaces equipped with standing pilots. A standing pilot is one which burns continuously, whether the main burner is on…
Magnehelic® differential pressure gauges provide a direct reading of pressure and/or air velocity. These gauges are used to measure filter resistance, air velocity, and furnace…
Manometers (Figures 1-37 and 1-38) are used to measure velocity and static air pressures and gas pressures. Pitot tubes and static pressure tips are probes…
Hygrometers (Figure 1-36) are used to measure the relative humidity in a controlled space. Hygrometers are also commonly called relative humidity meters. See Item 16…
Psychrometrics is the study of air and its properties, including temperature, pressure, moisture, and other characteristics. Control o f these properties is essential for human…
Velometers (Figure 1-32) are used to measure the velocity of airflow. Like the anemometers described previously, velometers are used when evaluating the operation and/or balancing…
Anemometers are used to measure the velocity of airflow. Measurement of air velocity must be performed when evaluating the total operation of an air distribution…
The hermetic compressor analyzer (Figure 1-28) is a single test instrument used to make multiple tests on hermetic compressors. This device eliminates the need for…
The capacitor tester (Figure 1-27) is used to test capacitors to determine their specific capacitance value and to find out if they are good, open,…