Figure 2-4 shows how the manufacturer represents the location of the various furnace devices. The solid lines indicate the line voltage to be installed. The…
Electrical schematics are used to make it simple to trace the circuits of various devices. Some of these can appear complicated, but they are usually…
In Fig. 2-2, the electrical heating system has a few more controls than the basic gas-fired furnace. The low-resistance element used for heating draws a…
Electric-fired heat is the only heat produced almost as fast as the thermostat calls for it. It is almost instantaneous. There are no heat exchangers…
The gas furnace is the simplest to operate and understand. Therefore, we will use it here to look at a typical heating system. This type…
Hot-air furnaces are self-contained and self-enclosed units. They are usually centrally located within a building or house. Their purpose is to make sure the temperature…