AHU – Reheat Coil
Reheat systems are strongly discouraged, unless recovered energy is used (see ASHRAE Standard 90.1). Reheating is limited to laboratory, health care, or similar applications where temperature and relative humidity must be controlled accurately. Heating coils located in the reheat position, as shown in Figure 1, are frequently used for warm-up, although a coil in the preheat position is preferable. Hot water heating coils provide the highest degree of control. Oversized coils, particularly steam, can stratify the airflow; thus, where cost-effective, inner distributing coils are preferable for steam applications. Electric coils may also be used.
Categories: Air Distribution | Leave a comment