Archive for May, 2019

Baxi Kingston 2 Cleaning the Burner and Injectors

{0 Comments}

Baxi Kingston 2 Cleaning the Burner and Injectors

1. Undo the screw retaining the spark electrode to the burner tray (Fig. 40). 2. Undo the screw retaining the burner to the burner tray (Fig. 41). 3. Slide the burner to the left to disengage from the injector. Rotate the electrode slightly and lift the burner out of the tray. 4. Using a soft […]

Read More…

Bent Tube Boilers

{0 Comments}

Bent tube boilers usually have three drums. The drums are usually of the same diameter and positioned at different levels with each other. The uppermost or highest positioned drum is referred to as the STEAM DRUM, while the middle drum is referred to as the WATER DRUM, and the lowest, the MUD DRUM. Tube banks […]

Read More…

Vertical-Tube Boiler

{0 Comments}

Vertical-Tube Boiler

In some fire-tube boilers, the tubes run vertically, as opposed to the horizontal arrangement in the Scotch boiler. The VERTICAL-TUBE boiler sits in an upright position, as shown in figure 1-3. Therefore, the products of combustion (gases) make a single pass, traveling straight up through the tubes and out the stack. The vertical fire-tube boiler […]

Read More…